Supermicro SYS-6018R-TDW

Key Features

1. Dual socket R3 (LGA 2011) supports
   Intel® Xeon® processor E5-2600 v3
   family; QPI up to 9.6GT/s
2. Up to 1TB ECC DDR4 2133MHz;
   16x DIMM sockets
3. 2x PCI-E 3.0 x16 Full-height Halt-length,
   1x PCI-E 3.0 Low-profile
4. 4x 3.5" Hot-swap SATA HDD bays
5. Intel® i350 Dual port Gigabit Ethernet
6. I/O ports: 2x SuperDOM, 1x VGA,
   1x COM, 2x USB 3.0, 2x USB 2.0
7. 600W High-efficiency Digital-switching
   Power Supply; Platinum Level

Product SKUs

SYS-6018R-TDW  SuperServer 6018R-TDW (Black)

 
Motherboard


Super X10DDW-i  
 
Processor/Cache  

CPU Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
Dual Socket R3 (LGA 2011)

Cores / Cache Up to 18 Cores / Up to 45MB Cache

System Bus QPI up to 9.6 GT/s

Note ** Please contact your Supermicro sales representative for additional details.
 
System Memory

Memory Capacity 16x 288-pin DDR4 DIMM sockets
Up to 1TB ECC LRDIMM, 512GB ECC RDIMM

Memory Type 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB

Memory Voltage 1.2 V

Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

 
On-Board Devices

Chipset Intel® C612 Express chipset

SATA SATA3 (6Gbps); RAID 0, 1, 5, 10

IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC

Network Controllers Intel® i350 Dual Port Gigabit Ethernet LAN
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)

Video ASPEED AST2400 BMC

 
Input / Output

Serial ATA 4x SATA3 (6Gbps) ports

LAN 2x RJ45 Gigabit Ethernet ports
1x RJ45 Dedicated IPMI LAN port

USB 2x USB 3.0 ports (rear)
2x USB 2.0 ports (rear)
1x Type A

Video 1x VGA port

Serial Port / Header 1x Fast UART 16550 header

DOM 2x SuperDOM (Disk on Module) ports

 
Management

Software Intel® Node Manager
SuperDoctor® 5
IPMI 2.0
NMI
SPM
SUM
Watch Dog

Power Configurations ACPI / APM Power Management
Power-on mode for AC power recovery  

Chassis

Form Factor 1U Rackmount

Model CSE-815TQ-605DB

 
Dimensions and Weight

Width 17.2" (437mm)

Height 1.7" (43mm)

Depth 25.6" (650mm)

Gross Weight 46 lbs (20.9kg)

Available Colors Black

 
Front Panel

Buttons Power On/Off button
UID button

LEDs Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED

 
Expansion Slots

PCI-Express 2x PCI-E 3.0 x16 full-height, Half-length slots
1x PCI-E 3.0 Low-profile slot

 
Drive Bays

Hot-swap 4x 3.5" Hot-swap SATA HDD trays

 
Backplane

SAS/SATA HDD Backplane
 
System Cooling

Fans 5x 4cm heavy-duty counter-rotating fans w/ air shroud and optimal fan speed control

 
Power Supply with Digital Switching Control & PMBus 1.2
600W AC power supply w/ PFC (24-pin)  
AC Voltage 100-240 V, 50-60 Hz, 7.5 Amp max

+5V 18 Amp

+5V standby 3 Amp

+12V 49 Amp

-12V 0.5 Amp

+3.3V 15 Amp

Certification 95%+ Platinum Level Certified  
 Platinum Certified
 [ Test Report ]  
 
System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1

 
Operating Environment / Compliance

RoHS
RoHS Compliant

Environmental Spec. Operating Temperature:
  5°C to 40°C (41°F to 104°F)
Non-operating Temperature:
  -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
  8% to 90% (non-condensing)
Non-operating Relative Humidity:
  5% to 95% (non-condensing)