Emulex OneConnect OCe14102-NX Dual 10GbE SFP+ Direct Attached Twin-Ax Copper, PCI-E 3.0 x8

Controller

   Emulex Engine™ (XE)100 series (Skyhawk™) of Ethernet Controllers

Ethernet Standards

   Single IEEE 802.3-2012 40GBASE Ethernet port (40GBASE-SR4/40GBASE-CR4)
   Single or Dual IEEE 802.3-2012 10GBASE Ethernet ports (10GBASE-SR/10GBASE-LR/10GBASE-CR)
   Single or Dual 1GBaseX/SGMII auto negotiation
   IEEE 802.1Q virtual LANs (VLAN)
   IEEE 802.3-2012 Flow control with Pause frames
   IEEE 802.1Qbg Edge Virtual Bridging
   IEEE 802.1Qaz Enhanced Transmission Selection (ETS); Data Center Bridging Capability Exchange (DCBX)
   IEEE 802.1Qbb Priority Flow Control (PFC)
   IEEE 802.1AX Link Aggregation/LACP
   IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
   IEEE 802.1Qau Congestion Notification

Ethernet Network Interface (Layer 2 NIC) and TCP/IP

   NDIS 6.0, 6.2, 6.3-compliant Ethernet functionality
   IPv4/IPv6 TCP, UDP checksum offload
   IPv4/IPv6 Receive Side Scaling (RSS)
   IPv4/IPv6 Large Receive Offload (LRO)
   IPv4/IPv6 Large Send Offload (LSO)
   Dynamic VMQ (Windows Server 2012 Hyper-V) and NetQueue (VMware vSphere) · Programmable MAC and VLAN addresses
   128 MAC/VLAN addresses per port
   Support for hash-based Multicast MAC address filters
   Support for hash-based Broadcast frame filters per port
   VLAN offloads (insertion and extraction)
   Jumbo frame support up to 9000 Bytes

I/O Virtualization

   Stateless L2, L3, and L4 offloads for frame-in-frame encapsulation (VXLAN, NVGRE)
   PCI-SIG Address Translation Service (ATS) v1.0
   Support for up to 512 hardware queues
   Virtual Switch Port Mirroring for diagnostic purposes
   Virtual Ethernet Bridging (VEB)
   Virtual Ethernet Port Aggregator (VEPA)
   Emulex Universal Multi-Channel (UMC), support for up to 16 PCIe physical functions (PFs) per adapter which can be used as partitions as follows:
       OCe14401 Ethernet adapter, the port can support 16 NIC functions
       OCe14101 or OCe14102 Ethernet adapters, each port can support eight NIC functions
       OCe14104 Ethernet adapters, each port can support four NIC functions
       Note: the system hardware must support and enable ARI and the host operating system must support ARI for maximum number of functions to be enabled; see Emulex UMC manual for more details
   NIC SR-IOV
       up to 63 virtual functions (VFs) per port
   Quality of Service (QoS) for controlling and monitoring bandwidth assigned to and  used by virtual entities
   Configurable control of network bandwidth by physical port, queue or protocol
   Traffic shaping and QoS across each VF and PF

Converged Enhanced Ethernet (CEE)
and Datacenter Bridging (DCB)

   IEEE 802.1Qbb Priority Flow Control (PFC)
   IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
   IEEE 802.1Qaz Data Center Bridging Exchange (DCBX)
   IEEE 802.1Qau Congestion Notification (QCN)
   Absolute per-priority rate control option/configuration

Remote Direct Memory Access (RDMA)

   Direct data placement in application buffers without CPU intervention
   Supports IBTA RoCE specifications
   Linux Open Fabrics Enterprise Distribution (OFED) support
   Support for Linux Network File System (NFS) over
   RoCE, iSCSI Extensions for RDMA (iSER)
   Low latency queues for small packet sends and receives
   Windows Server SMB Direct (SMB Direct over RDMA)



PCI Express (PCIe) Interface

   PCIe 3.0 x8 (8, 5.0, and 2.5GTps per lane) compliant interface:
       Up to 64Gbps full duplex bandwidth
       Configurable width and speed to optimize power versus bandwidth
   Support for up to 16 PCIe physical functions (PFs)
   Support for x1, x2, x4 and x8 links widths
   NIC Single Root I/O Virtualization (SR-IOV)
       up to 63 virtual functions (VFs) per port
   Message Signal Interrupts Extended (MSI-X)
   Advanced Error Reporting (AER)
   Completion Timeout (CTO)
   Function Level Reset (FLR)
   Alternative Routing ID Interpretation (ARI)

Comprehensive OS Support

   Windows
   Red Hat Enterprise Linux
   SUSE Linux Enterprise Server
   Oracle Linux
   VMware vSphere
   CentOS
   Debian
   Ubuntu
   FreeBSD

Management, Boot Support

   vCenter management plug-in support
   Role-based management, integrated with Active Directory and LDAP
   Multi-channel configuration and bandwidth control
   UEFI and x86 remote boot support including PXE v2.1, UEFI 2.3.1
   MAC statistics gathering (SNMP, Ethernet MIB, MIB2, RMON, RMON2)
   Offline and online firmware updates
   Integrated thermal sensor works with management utilities

Hardware Environments

   x86, x64 servers

Interconnect

Copper

   SFP+ Direct Attached Twin-Ax Copper interface
   Standards compliant passive copper cables up to 5m and active copper cables up to 10m

Optical

   Optic 10GBASE-SR short wave lasers with LC type connector supported up to 300m on laser optimized OM3 multimode fiber (MMF) cables
   Optic 40GBASE-SR4 short wave lasers with MPO type connector supported up to 100m for OM3 and 150m for OM4 respectively on MMF cables
   Optic 10GBASE-LR long wave lasers with LC type connector supported up to 10km single mode fiber (SMF) cable, Ethernet use only

Physical Dimensions

   For single-port and dual-port adapters:
       Short, low profile MD2 form factor card
       167.64mm x 68.91mm (6.60” x 2.71”)
       Standard, full height bracket installed
       (low-profile bracket available)

Environmental Requirements

   Operating temperature: 0° to 55°C (32° to 131°F)
   Storage temperature: -40° to 70°C (-40° to 158°F)
   Relative humidity: 5% to 95% non-condensing

Agency and product safety approvals

North America

   FCC/Industry Canada Class A
   UL/CSA Recognized
   Class 1 Laser Product per DHHS 21CFR (J)

Europe

   CE Mark
   EU RoHS compliant
   TUV Bauart Certified
   Class 1 Laser Product per EN60825-1

Australia

   C-Tick or RCM Mark

Japan

   VCCI Class A

Taiwan

   BSMI Class A

Korea

   · MSIP (formally KCC/MIC) Class A

China

   China RoHS Compliant