SUPERMICRO 1U server SYS-5018D-MTRF

1x LGA1150, iC224, 4x DDR3 ECC, 4x SATA HS (3,5"), 2x400W,IPMI


1. Single socket H3 (LGA 1150) supports
   Intel® Xeon® E3-1200 v3, 4th gen.
   Core i3, Pentium, Celeron processors
2. Intel® C224 Express PCH
3. 4x 3.5" Hot-swap SATA3 HDD bays
4. 1x PCI-E 3.0 x8 (in x16) Full-height slot
5. Up to 32GB DDR3 ECC 1600MHz
   UDIMMs in 4 sockets
6. Dual Gigabit Ethernet LAN ports
   (1x Intel® i217LM & 1x Intel® i210AT)
7. IPMI 2.0 on Dedicated LAN port
8. 400W Redundant Power Supplies
   Optional Battery Backup Power (BBP®)

Motherboard


Super X10SLM-F  
 
Processor/Cache

CPU Intel® Xeon® processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
Socket H3 (LGA 1150)

 
System Memory

Memory Capacity 4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)

Memory Type 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes 8GB, 4GB, 2GB, 1GB

Memory Voltage 1.5 V

Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

 
On-Board Devices

Chipset Intel® C224 Express PCH

SATA SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
SATA2 (3Gbps) w/ RAID 0, 1

IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 BMC with 10/100/1000Mbps

Network Controllers Intel® i217LM + Intel® i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)

VGA Aspeed AST2400 BMC

 
Input / Output

Serial ATA 4x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports
SATA DOM Power Connector

LAN 2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port

USB 4x USB 3.0 ports (1 Type-A, 2+1 via header)
6x USB 2.0 ports (4 rear, 2 via header)

VGA 1x VGA port

Serial Port / Header 1x Fast UART 16550 serial port
1x internal header

 
PC Health Monitoring

Voltage Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

FAN Total of five 4-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors

Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI

LED CPU / System Overheat LED
+5V Standby alert LED

Other Features Chassis intrusion detection
Chassis intrusion header  

Chassis

Form Factor 1U Rackmount

Model CSE-813MTQ-R400CB

 
Dimensions

Height 1.7" (43mm)

Width 17.2" (437mm)

Depth 19.8" (503mm)

Weight Gross Weight: 70 lbs (32 kg)
Net Weight: 38 lbs (17 kg)

Available Colors Black

 
Front Panel

Buttons Power On/Off button
System Reset button

LEDs Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED

Ports 2x USB ports
1x Serial COM Port

 
Expansion Slots

PCI-Express 1x PCI-E 3.0 x8 (in x16) Full-height slot

 
Drive Bays

Hot-swap 4x 3.5" Hot-swap SATA3 HDDs w/ RAID

Peripheral Bay Slim optical drive (optional)

 
Backplane

SAS2/SATA3 HDD Backplane
(SAS support requires optional SAS controller)
 
System Cooling

Fans 4x 4cm 12,500 RPM PWM fans
Optional fans to cool add-on cards

 
Power Supply
400W (1+1) Redundant SuperCompact Short-depth AC-DC Gold-level power supply with PMBus and I2C
AC Input 400W: 100-240 V, 50-60 Hz, 6-3 Amp

DC Output
+5V standby 3 Amp

DC Output
+12V 33 Amp

With Power Distributor +5V: 25 Amp
+3.3V: 25 Amp
-12V: 0.6 Amp

 
System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3

 
Management

Software IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI

Power Configurations ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on

 
Operating Environment / Compliance

RoHS
RoHS2 (2011/65/EU) Compliant

Environmental Spec. Operating Temperature:
  10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
  -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
  8% to 90% (non-condensing)
Non-operating Relative Humidity:
  5% to 95% (non-condensing)