Supermicro SYS-1028R-WTNR

Processor/Cache
CPU

   Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
   Dual Socket R3 (LGA 2011)

Cores / Cache

   Up to 22 Cores† / Up to 55MB† Cache

System Bus

   QPI up to 9.6 GT/s

Note † BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory
Memory Capacity

   16x 288-pin DDR4 DIMM slots
   Up to 2TB† ECC 3DS LRDIMM, 512 ECC RDIMM

Memory Type

   2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

   RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
   LRDIMM: 64GB, 32GB
   3DS LRDIMM: 128GB

Memory Voltage

   1.2 V

Error Detection

   Corrects single-bit errors


On-Board Devices
Chipset

   Intel® C612 chipset

SATA

   SATA3 (6Gbps); RAID 0, 1, 5, 10

IPMI

   Support for Intelligent Platform Management Interface v.2.0
   IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
   ASPEED AST2400 BMC

Network Controllers

   Intel® i350 Dual Port Gigabit Ethernet Controller
   Virtual Machine Device Queues reduce I/O overhead
   Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
   1x Realtek RTL8211E PHY (dedicated IPMI)

Video

   ASPEED AST2400 BMC


Input / Output
Serial ATA

   8 SATA3 (6 Gbps) ports and 2 NVMe/SATA3 hybrid ports

LAN

   2x RJ45 Gigabit Ethernet LAN ports
   1x RJ45 Dedicated IPMI LAN port

USB

   2x USB 3.0 ports (front via header)
   4x USB 2.0 ports (rear)

Video

   1x VGA port

Serial Port / Header

   1x Fast UART 16550 header

DOM

   2x SuperDOM (Disk on Module) ports


PC Health Monitoring
Voltage

   Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
   5+1 Phase-switching voltage regulator

FAN

   6x 4-pin fan headers (up to 6 fans)
   6x fans with tachometer monitoring
   Status monitor for speed control
   Pulse Width Modulated (PWM) fan connectors

Temperature

   Monitoring for CPU and chassis environment
   CPU thermal trip support
   Thermal Control for 8x Fan Connectors
   Thermal Monitor 2 (TM2) support
   PECI

LED

   CPU / System Overheat LED
   Suspend static indicator LED
   UID/Remote UID

Other Features

   Chassis intrusion detection
   Chassis intrusion header
   SDDC Support
   RoHS

Chassis
Form Factor

   1U Rackmount

Model

   CSE-116AC2-R706WB


Dimensions and Weight
Width

   17.2" (437mm)

Height

   1.7" (43mm)

Depth

   23.5" (597mm)

Gross Weight

   46 lbs (20.9kg)

Available Colors

   Black


Front Panel
Buttons

   Power On/Off button
   UID button

LEDs

   Power status LED
   HDD activity LED
   2x Network activity LEDs
   Universal Information (UID) LED


Expansion Slots
PCI-Express

   2x PCI-E 3.0 x16 full-height, half-length slots


Drive Bays
Hot-swap

   8x SATA3 (6Gbps) ports and 2x NVMe/STAT3 hybrid ports (connected to onboard storage controller)


Backplane
SAS/SATA HDD Backplane

System Cooling
Fans

   5x 4cm heavy-duty counter-rotating fans w/ air shroud and optimal fan speed control


Power Supply
700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C
AC Voltage

   700W: 100 - 140 V, 50-60 Hz
   750W: 200 - 240V, 50-60 Hz

DC Output +5V standby

   3 Amp

DC Output +12V

   700W: 58 Amp @ 100-140V
   750W: 62 Amp @ 200-240V

Certification Platinum Level Certified   Platinum Certified
 [ Test Report ]

System BIOS
BIOS Type

   128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

   Plug and Play (PnP)
   APM 1.2
   PCI 2.3
   ACPI 1.0 / 2.0 / 3.0 / 4.0
   USB Keyboard support
   SMBIOS 2.7.1
   UEFI 2.3.1


Management
Software

   SuperDoctor® 5
   Watch Dog
   NMI
   IPMI 2.0
   Intel Node Manager

Power Configurations

   ACPI / APM Power Management
   Power-on mode for AC power recovery


Operating Environment / Compliance
RoHS


   RoHS Compliant

Environmental Spec.

   Operating Temperature:
      10°C to 35°C (50°F to 95°F)
   Non-operating Temperature:
      -40°C to 70°C (-40°F to 158°F)
   Operating Relative Humidity:
      8% to 90% (non-condensing)
   Non-operating Relative Humidity:
      5% to 95% (non-condensing)