Supermicro SYS-1028GQ-TR

1. Dual socket R3 (LGA 2011) supports
   Intel® Xeon® processor E5-2600
   v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 2TB† ECC 3DS LRDIMM , up to
   DDR4- 2400†MHz ; 16x DIMM slots
3. 4x PCI-E 3.0 x16 slots (4x GPU/
   Xeon Phi cards opt.), 2x PCI-E
   3.0 x8 (in x16) LP slot
4. Intel i350 Dual port GbE LAN
5. 2x 2.5" Hot-swap drive bays,
   2x 2.5" internal drive bays
6. 9x 4cm heavy duty counter-rotating
   fans with air shroud & optimal fan
   speed control
7. 2000W Redundant Power Supplies
   Platinum Level (94%+)

Processor/Cache
CPU

   Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
   Dual Socket R3 (LGA 2011)

Cores / Cache

   Up to 22 Cores† / Up to 55MB† Cache

System Bus

   QPI up to 9.6 GT/s

Note † BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
GPU/Xeon Phi Support

   K1/K2/K10/K40/K80/M40/M60/Xeon Phi


System Memory
Memory Capacity

   16x 288-pin DDR4 DIMM slots
   Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM

Memory Type

   2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

   RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
   LRDIMM: 64GB, 32GB
   3DS LRDIMM: 128GB

Memory Voltage

   1.2 V

Error Detection

   Corrects single-bit errors


On-Board Devices
Chipset

   Intel® C612 chipset

SATA

   SATA3 (6Gbps) with RAID 0, 1, 5, 10

IPMI

   Support for Intelligent Platform Management Interface v.2.0
   IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
   ASPEED AST2400 BMC

Network Controllers

   Intel® i350 Dual Port Gigabit Ethernet
   Virtual Machine Device Queues reduce I/O overhead
   Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Graphics

   ASPEED AST2400 BMC


Input / Output
SATA

   4x SATA3 (6Gbps) ports

LAN

   2x RJ45 Gigabit Ethernet ports
   1x RJ45 Dedicated IPMI LAN port

USB

   2x USB 3.0 ports (2 via headers)

Video

   1x VGA Connector

Serial Port

   1x Serial header


System BIOS
BIOS Type

   128Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

   Plug and Play (PnP)
   APM 1.2
   DMI 2.3
   PCI 2.3
   ACPI 1.0 / 2.0 / 3.0
   USB Keyboard support
   SMBIOS 2.7.1
   UEFI

Chassis
Form Factor

   1U Rackmount

Model

   CSE-118GQE-R2K03P


Dimensions and Weight
Height

   1.7" (43mm)

Width

   17.2" (437mm)

Depth

   35.2" (894mm)
   39.3" (997mm) with rails

Package

   24" (H) x 8" (W) x 46" (D)

Weight

   Net Weight: 45 lbs (15.9 kg)
   Gross Weight: 58 lbs (21.8 kg)

Available Color

   Black


Front Panel
Buttons

   Power On/Off button
   System Reset button

LEDs

   Power LED
   Hard drive activity LED
   2x Network activity LEDs
   System Overheat LED / Fan fail LED /
   UID LED


Expansion Slots
PCI-Express

   4x PCI-E 3.0 x16 slots
   (4x GPU/Xeon Phi cards optional)
   2x PCI-E 3.0 x8 (in x16) low-profile slot


Drive Bays
Hot-swap

   2x 2.5" Hot-swap drive bays

Fixed

   2x 2.5" internal drive bays


System Cooling
Fans

   9x 4cm heavy duty counter-rotating fans with air shroud & optimal fan speed control


Power Supply
2000W 1U Redundant Power Supplies with PMBus
Total Output Power

   1000W/1800W/1980W/2000W

Dimension
(W x H x L)

   73.5 x 40 x 265 mm

Input

   100-120Vac / 11.8-9.8A / 50-60Hz
   200-220Vac / 10-9.5A / 50-60Hz
   220-230Vac / 10-9.8A / 50-60Hz
   230-240Vac / 10-9.8A / 50-60Hz
   200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)

+12V

   Max: 83.3A / Min: 0.1A (100-120Vac)
   Max: 150A / Min: 0.1A (200-220Vac)
   Max: 165A / Min: 0.1A (220-230Vac)
   Max: 166.7A / Min: 0.1A (230-240Vac)
   Max: 166.7A / Min: 0.1A (200-240Vac) (UL/cUL only)

12V SB

   Max: 3.5A / Min: 0A

Output Type

   25 Pairs Gold Finger Connector

Certification Platinum Level Certified94%+  Platinum Level
   [ Test Report ]

PC Health Monitoring
CPU

   Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
   5 Phase-switching voltage regulator

FAN

   Total of nine 4-pin PWM fans
   9x fans with tachometer monitoring
   Status monitor for speed control
   Status monitor for on/off control
   Low noise fan speed control

Temperature

   Monitoring for CPU and chassis environment
   CPU thermal trip support
   Thermal Control for 9x Fan Connectors
   PSU I2C temperature sensing logic
   Thermal Monitor 2 (TM2) support
   PECI

LED

   Power Fail / Overheat LED
   Suspend-state Indicator LED
   UID LED

Other Features

   SDDC Support


Operating Environment / Compliance
RoHS


   RoHS Compliant

Environmental Spec.

   Operating Temperature:
      10°C to 35°C (50°F to 95°F)
   Non-operating Temperature:
      -40°C to 70°C (-40°F to 158°F)
   Operating Relative Humidity:
      8% to 90% (non-condensing)
   Non-operating Relative Humidity:
      5% to 95% (non-condensing)