Supermicro MBD-X10DRD-INTP-O

1. Dual socket R3 (LGA 2011) supports
   Intel® Xeon® processor E5-2600
   v4†/ v3 family; QPI up to 9.6GT/s
2. Intel® C612 chipset
3. Up to 1TB† ECC 3DS LRDIMM , up to
   DDR4- 2400†MHz ; 8x DIMM slots
4. Expansion slots: 4x PCI-E 3.0 x8
5. Intel® 82599ES Dual port 10G SFP+
6. 10x SATA3 (6Gbps) ports;
   RAID 0, 1, 5, 10
7. Integrated IPMI 2.0 and KVM with
   Dedicated LAN
8. 7x USB 2.0 ports
   (4 rear, 2 via headers, 1 Type A)
9. 2x PCI-E 3.0 NVMExpress x4 internal
   ports

Physical Stats
Form Factor

   E-ATX

Dimensions

   13.05" x 10.5" (33.1cm x 26.7cm)


Processor/Cache
CPU

   Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP**)
   Dual Socket R3 (LGA 2011)

Cores / Cache

   Up to 22 Cores† / Up to 55MB† Cache

System Bus

   QPI up to 9.6 GT/s

Note † BIOS version 2.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.

System Memory
Memory Capacity

   8x 288-pin DDR4 DIMM slots
   Up to 1TB† ECC 3DS LRDIMM, 512GB ECC RDIMM

Memory Type

   2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

   RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
   LRDIMM: 64GB, 32GB
   3DS LRDIMM: 128GB

Memory Voltage

   1.2 V

Error Detection

   Corrects single-bit errors


On-Board Devices
Chipset

   Intel® C612 chipset

AHCI SATA

   SATA3 (6Gbps); RAID 0, 1, 5, 10

SCU SATA

   SATA3 (6Gbps); RAID 0, 1, 5, 10

IPMI

   Support for Intelligent Platform Management Interface v.2.0
   IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
   ASPEED AST2400 BMC

Network Controllers

   Intel® 82599ES Dual port 10G SFP+
   Virtual Machine Device Queues reduce I/O overhead
   Supports 10G SFP+
   1x Realtek RTL8201N PHY (dedicated IPMI)

Video

   ASPEED AST2400 BMC


Input / Output
SATA

   10x SATA3 (6Gbps) ports

NVMExpress

   2x PCI-E 3.0 NVMExpress x4 Internal Ports

LAN

   2x 10 Gigabit Ethernet SFP+ ports
   1x RJ45 Dedicated IPMI LAN port

USB

   7x USB 2.0 ports total
   (4 rear, 2 via headers, 1 Type A)

Video

   1x VGA port

Serial Port / Header

   2x COM Ports (1 rear, 1 header)

DOM

   2 SuperDOM (Disk on Module) ports

TPM

   1x TPM 1.2 20-pin Header

Chassis (Optimized for X10DRD-iNTP )
1U Chassis:

   SC815TQ-R500CB
   SC514-505
   SC514-441
   SC514-R400C

Important Chassis Notes

   To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.


Expansion Slots
PCI-Express

   4x PCI-E 3.0 x8 slots


System BIOS
BIOS Type

   128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

   Plug and Play (PnP)
   PCI 2.3
   ACPI 1.0 / 2.0 / 3.0 / 4.0
   USB Keyboard support
   SMBIOS 2.7.1
   UEFI 2.3.1


Management
Software

   Intel Node Manager
   IPMI 2.0
   NMI
   SuperDoctor® 5
   Watch Dog

Power Configurations

   ACPI Power Management
   Power-on mode for AC power recovery


PC Health Monitoring
Voltage

   Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, +3.3V Standby, VBAT, Memory Voltages.
   6 Phase-switching voltage regulator

FAN

   8x 4-pin fan headers (up to 8 fans)
   8x fans with tachometer monitoring
   Status monitor for speed control
   Pulse Width Modulated (PWM) fan connectors

Temperature

   Monitoring for CPU and chassis environment
   CPU thermal trip support
   Thermal Control for 8x Fan Connectors
   Thermal Monitor 2 (TM2) support
   PECI

LED

   CPU / System Overheat LED
   Suspend static indicator LED
   UID/Remote UID

Other Features

   RoHS


Operating Environment
Operating Temperature Range

   10°C - 35°C (50°F - 95°F)

Non-Operating Temperature Range

   -40°C - 70°C (-40°F - 158°F)

Operating Relative Humidity Range

   8% - 90% (non-condensing)

Non-Operating Relative Humidity Range

   5% - 95% (non-condensing)