Supermicro MBD-H11DSi-O

Key Features 1. Dual AMD EPYC 7000-Series Processors; System on Chip (SoC) 2. 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs 3. Expansion slots: 2 PCI-E 3.0 x16 3 PCI-E 3.0 x8 4. 10 SATA3, 1 M.2, 2 SATA DOM 5. Dual Gigabit Ethernet LAN Ports 6. ASPEED AST2500 BMC graphics 7. Up to 2 USB 3.0 ports Up to 4 USB 2.0 ports 8. 8 4-pin PWM Fan & Speed control Product SKUs MBD-H11DSi-B H11DSi (Bulk Pack) MBD-H11DSi-O H11DSi (Retail Pack) Physical Stats Form Factor E-ATX Dimensions 12" x 13.05" (30.5cm x 33.1cm) Processor/Chipset CPU Dual AMD EPYC™ 7000-series Processors Socket SP3 Chipset System on Chip System Memory Memory Capacity 16 DIMM sockets Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs 8-channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix Memory Type DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs DIMM Sizes 8GB, 16GB, 32GB, 64GB, 128GB Memory Voltage 1.2V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices SATA SATA3 (6 Gbps) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC Network Controllers 2 1GbE LAN via Intel® i350-AM21 1 Realtek RTL8211E PHY (dedicated IPMI) VGA ASPEED AST2500 BMC Input / Output SATA 10 SATA3 (6 Gbps) ports LAN 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port USB 2 USB 3.0 ports (rear) 4 USB 2.0 ports (2 rear + 2 via header) VGA 1 VGA port Others 1 COM port (rear) 2 SATA DOM power connector 1 TPM 2.0 header Expansion Slots PCI-Express 3 PCI-E 3.0 x8 2 PCI-E 3.0 x16 M.2 Interface: PCI-E 3.0 x2 Form factor: 22110 Support SATA devices Chassis ( Optimized for H11DSi ) 4U Chassis CSE-745BAC-R1K28B2 System BIOS BIOS Type AMI 128Mb SPI Flash EEPROM BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1 Management Software Super Doctor 5 Watch Dog NMI SPM SUM IPMI 2.0, KVM with dedicated LAN Power Configurations ACPI Power Management Power-on mode control for AC power loss recovery PC Health Monitoring CPU Monitors CPU Core Voltages, +1.5V, +1.8V, +12V +5V, +5V standby CPU switching voltage regulator Supports system management utility VBAT FAN Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Dual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic LED CPU / System Overheat LED Other Features Chassis Intrusion Detection Chassis Intrusion Header UID Operating Environment / Compliance Environmental Specifications Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)